6×4 Crane Truck Hire
6×4 Hino 500
Rear Mount Crane Truck
The Hino 500 combines an 8 m steel tray with a rear mount crane arrangement with a Ferrari 718 crane. Its published payload is 10 t. Confirm the allocated vehicle configuration with CST Hire.
- Tray length
- 8 m steel tray
- Drive type
- 6×4
- Published payload
- 10 t
- Rollover protection
- ROPS included
- Licence requirement
- Confirm with CST Hire
- Vehicle seating
- 2 people
Figures shown are from the linked 6×4 rear mount data sheet. Confirm the allocated vehicle, project equipment and current load chart with CST Hire.
Lifting capacity & reach
The 6×4 rear mount Hino 500 data sheet lists the following capacities at reach. Use these figures to discuss your lifting requirements with CST Hire.
| Reach | Lifting capacity |
|---|---|
| 5 m | 3,305 kg |
| 8 m | 1,590 kg |
| 10 m | 995 kg |
| 12 m | 845 kg |
Source: CST Hire 6×4 Rear Mount Hino 500 data sheet. This is a guide, not the vehicle load chart. Actual vehicle specifications may vary. Confirm the allocated crane, current load chart and lift requirements before use. The data sheet lists a crane operator ticket requirement.
Included in the specification
- 8 m steel tray and container pins
- Rollover protection system (ROPS)
- Air-conditioned cab and UHF radio
- Reverse beeper and roof-mounted revolving light
- Tool boxes and fire extinguisher
- Air bag suspension
- Safety gates on tray
Available on request
Mine specification, in-vehicle monitoring (IVMS) and driver fatigue management systems. Tell us what your project requires when enquiring.
Key considerations
before hiring.
Discuss your site, load and hire dates.
1300 942 342What lifting capacity and reach does my project require?
Provide the weight of the items you need to lift and the required lifting reach. Capacity varies with reach, so use the published crane capacity table as a starting point for your enquiry. Ask CST Hire to confirm the allocated crane and current load chart against your lifting requirements.
Is this 6×4 crane truck suitable for my site?
Describe the access route, surface conditions, gradients, clearances and available loading area. For projects across several sites, include the conditions at each location. This helps CST Hire assess whether the Hino 500 rear mount configuration suits your transport and access requirements.
Is a 8 m tray suitable for my load?
The Hino 500 data sheet lists an 8 m steel tray and a published payload of 10 t. Provide your load’s length, width, height and total weight, together with any loading or restraint requirements. Confirm the allocated vehicle’s usable tray dimensions and payload for the intended operating conditions before finalising the hire.
What project specifications should I confirm before hiring?
Share the project’s vehicle specification, location and hire dates, including any mine specification, IVMS or fatigue management requirements. Confirm the allocated vehicle’s ROPS and required project equipment, driver and operator requirements, and mobilisation arrangements with CST Hire.
