4×4 Crane Truck Hire
4×4 Hino GT
Crane Truck
The Hino GT combines a 6 m tray with side gates and a front-mounted HMF 910 K3 crane. Rollover protection is included in the published project specification.
- Tray length
- 6 m with side gates
- Drive type
- 4×4
- Published payload
- 5 t
- Rollover protection
- ROPS included
- Licence listed
- Medium Rigid (MR)
- Vehicle seating
- 2 people
Specifications shown are from the linked Hino GT front mount data sheet. Confirm the allocated vehicle and current load chart with CST Hire.
Lifting capacity & reach
The HMF 910 K3 data sheet lists the following capacities at reach. Use these figures to discuss your lifting requirements with the CST Hire team.
| Reach | Lifting capacity |
|---|---|
| 3.8 m | 1,925 kg |
| 5.6 m | 1,265 kg |
| 9 m | 725 kg |
Source: CST Hire 4×4 Front Mount Hino GT data sheet. This is a summary, not the vehicle load chart. Actual vehicle specifications may vary. Confirm the allocated crane, load chart and lift requirements before use. The data sheet lists a crane operator ticket requirement.
Included in the specification
- 6 m tray with side gates and container pins
- Rollover protection system (ROPS)
- Air-conditioned cab and UHF radio
- Reverse beeper and roof-mounted revolving light
- Tool boxes and fire extinguisher
- In-cab controls and reflective high-visibility tape
Available on request
Mine specification, in-vehicle monitoring (IVMS) and driver fatigue management systems. Tell us what your project requires when enquiring.
Key considerations
before hiring.
Discuss your site, load and hire dates.
1300 942 342What lifting capacity and reach does my project require?
Provide the weight of the items you need to lift and the required lifting reach. Capacity varies with reach, so use the published crane capacity table as a starting point for your enquiry. Ask CST Hire to confirm the allocated crane and current load chart against your lifting requirements.
Is a 4×4 crane truck suitable for my site?
Describe the access route, surface conditions, gradients, clearances and available loading area. For projects across several sites, include the conditions at each location. This helps CST Hire assess whether the Hino GT configuration suits your transport and access requirements.
Is a 6 m tray suitable for my load?
This Hino GT data sheet lists a 6 m tray with side gates and a 5 t payload. Provide your load’s length, width, height and total weight, together with any loading or restraint requirements. Confirm the allocated vehicle’s usable tray dimensions and payload before finalising the hire.
What project specifications should I confirm before hiring?
Share the project’s vehicle specification, location and hire dates, including any mine specification, IVMS or fatigue management requirements. ROPS is included in the published specification, while monitoring systems are available on request. Confirm the required equipment, driver and operator requirements, and mobilisation arrangements with CST Hire.
