6×4 Fuso Crane Tilt Truck Hire
6×4 Fuso FN Fighter
Crane Tilt Truck
The Fuso FN Fighter combines a 7 m tilt tray, winch and Palfinger PK12.501 crane in a 6×4 truck. Its listed payload is 9 t, with a 23,000 kg GVM and Allison automatic transmission. Compare the tray space and crane reach against your load before requesting a hire quote.
- Tray length
- 7 m tilt tray
- Listed payload
- 9 t
- Drive type
- 6×4
- Gross vehicle mass
- 23,000 kg
- Rollover protection
- Included
- Transmission
- Allison automatic
- Licence listed
- Heavy Rigid (HR)
- Vehicle seating
- 2 people
Figures are from the linked Fuso FN Fighter data sheet. Confirm the allocated vehicle and project equipment with CST Hire.
Lifting capacity & reach
The PK12.501 figures below show the change in lifting capacity from 3.8 m to 7.6 m reach. The truck’s 9 t payload is a transport figure; it is separate from the crane’s lifting capacity.
| Reach | Lifting capacity |
|---|---|
| 3.8 m | 2,900 kg |
| 5.7 m | 1,920 kg |
| 7.6 m | 1,440 kg |
Source: CST Hire 6×4 Fuso FN Fighter data sheet. These reference figures do not replace the allocated crane’s current load chart. The sheet lists a crane operator ticket requirement; confirm driver and operator requirements for your hire.
Included in the specification
- 7 m tilt tray with container pins and winch
- Rollover protection system (ROPS)
- Air bag suspension
- Air-conditioned cab and UHF radio
- Reverse beeper and roof-mounted revolving light
- Tool boxes and fire extinguisher
- Reflective high-visibility tape
Project requirements
Mine specification, in-vehicle monitoring (IVMS) and driver fatigue management systems are available on request. Include your site’s equipment requirements in the enquiry.
Hiring the
Fuso FN Fighter.
Discuss your load, site and hire dates.
1300 942 342What is the payload of the 6×4 Fuso crane tilt truck?
The Fuso FN Fighter data sheet lists a 9 t payload and a 23,000 kg GVM. GVM is the maximum total vehicle mass, rather than the weight of cargo alone. Send the total load weight and dimensions with your enquiry so CST Hire can confirm the allocated truck’s usable payload and tray space.
How far can its Palfinger crane lift the load?
The published PK12.501 table lists 2,900 kg at 3.8 m, 1,920 kg at 5.7 m and 1,440 kg at 7.6 m. Include both load weight and required reach when enquiring. These reference figures do not replace the allocated crane’s load chart or a lift assessment.
Does this Fuso have a winch and container pins?
Yes. The specification includes a 7 m tilt tray with a winch and container pins. Tell the team how your load needs to be loaded and restrained, including its dimensions and attachment points. Container pins alone do not establish that a particular container can be carried or lifted.
What equipment is listed for project use?
ROPS, air bag suspension, UHF radio, tool boxes, a reverse beeper, a revolving light, reflective tape and a fire extinguisher are listed. Mine specification, IVMS and fatigue management equipment can be requested. Share the project specification so the required configuration can be confirmed.
How does the 6×4 Fuso compare with an 8×4 combo?
This Fuso has a listed 9 t payload and 7 m tray. The four 8×4 combos list 10 t payloads; Volvo, Hino and UD have 7.5 m trays, while the Fuso Shogun has a 7 m tray. Their crane tables also differ. Use the individual pages below to compare the figures that matter for your load.
