8×4 Hino 700 Crane Tilt Truck Hire
8×4 Hino 700
Crane Tilt Truck
The 8×4 Hino 700 combines a 7.5 m tilt tray and winch with an HMF 1920K crane. The data sheet lists a 10 t payload and five crane reach points, extending to 12.7 m. ROPS is listed as available, so include that requirement when specifying the truck for your project.
- Tray length
- 7.5 m tilt tray
- Listed payload
- 10 t
- Drive type
- 8×4
- Gross vehicle mass
- 27,500 kg
- Rollover protection
- Available on request
- Transmission
- Automatic
- Licence listed
- Heavy Rigid (HR)
- Vehicle seating
- 2 people
Figures are from the linked Hino 700 data sheet. Confirm the allocated vehicle and project equipment with CST Hire.
Lifting capacity & reach
The HMF 1920K has five published capacity points. Use its exact reach figures when comparing it with the Volvo, Fuso and UD cranes; the distances in their tables are not all the same.
| Reach | Lifting capacity |
|---|---|
| 4.3 m | 4,200 kg |
| 6.2 m | 2,910 kg |
| 8.3 m | 2,100 kg |
| 10.4 m | 1,560 kg |
| 12.7 m | 1,170 kg |
Source: CST Hire 8×4 Hino 700 data sheet. These reference figures do not replace the allocated crane’s current load chart. The sheet lists a crane operator ticket requirement; confirm driver and operator requirements for your hire.
Included in the specification
- 7.5 m tilt tray with container pins and winch
- Air bag suspension
- Air-conditioned cab and UHF radio
- Reverse beeper and roof-mounted revolving light
- Tool boxes and fire extinguisher
- Reflective high-visibility tape
- Bull bar
Project requirements
ROPS is listed as available. Mine specification, IVMS and driver fatigue management systems can also be requested. Confirm the required equipment when enquiring.
Which crane is listed for the Hino 700 combo?
The Hino 700 data sheet specifies an HMF 1920K. Its published table ranges from 4,200 kg at 4.3 m to 1,170 kg at 12.7 m. Provide your load weight and working reach so the allocated truck and crane can be assessed for the task.
What are the Hino’s capacities at longer reach?
The table lists 2,100 kg at 8.3 m, 1,560 kg at 10.4 m and 1,170 kg at 12.7 m. These are separate published points, not a rating for every distance between them. Use the current load chart for the allocated crane when planning the lift.
Does this Hino include ROPS as standard?
The linked Hino 700 data sheet lists ROPS as available, rather than included. If rollover protection is required for your site, add it to your enquiry and confirm the allocated vehicle’s configuration before hire.
How much can the Hino carry on its tilt tray?
Its listed payload is 10 t on a 7.5 m tilt tray, with a 27,500 kg GVM. The specification also includes a winch and container pins. Supply the load dimensions, mass and intended loading method so CST Hire can check the vehicle against your transport requirements.
What should I include in a Hino 700 hire enquiry?
Include hire dates, project location, load dimensions and weight, required crane reach and any ROPS or mine-spec requirements. The Request a quote button adds the 8×4 Hino crane/tilt truck to the enquiry form, where you can adjust quantity and add project details.
